239 results for “sliding mode control”
Research Article
Open Access Comparative Analysis of PI and Sliding Mode Control Methods for Cascade DC/DC Boost Converters
Kemal Kaya, Kaya K, Yakup Hameş, Hameş Y
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.024
In this study, a single switch cascade DC/DC boost converter has been preferred instead of conventional cascade DC/DC boost converter to reduce cost and provide simple system control. High-performance controller design for DC/DC converters is the most importan…
Research Article
Open Access Comparison of Control Methods Approaches in Microgrid Architectures
Ayşe Bağıran, Bağıran A, Köksal Erentürk, Erentürk K
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.070
A microgrid is a power grid consists of distributed power generation units and loads. Microgrid is also a system that can operate in grid-connected mode and islanding (autonomous) mode. The control of distributed power generation units in microgrids is necessa…
Research Article
Open Access A Singular-Feed Circularly Polarized Metasurface Antennas Using Characteristic Mode Analysis
M. Dilruba Geyikoglu, Geyikoglu M, Hilal Koc Polat, Koc Polat H
Proceeding of the 5th International Symposium on Innovative Approaches in Smart Technologies 2022 https://doi.org/10.36287/setsci.5.1.010
In this paper, a singular-feed circularly polarized (CP) metasurface antenna with broad impedance bandwidth is presented. The antenna consists of modified slots with a lattice of 3 × 3 square conductive patches. Modes are selected and excited by modified slot …
Research Article
Open Access Zn-15Al-3Cu-(0,5-3)Si alaşımlarının yağlı çalışma koşullarındaki sürtünme ve aşınma özelliklerinin incelenmesi
Ali Paşa Hekimoğlu , Hekimoğlu A, Temel Savaşkan , Savaşkan T
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Bu çalışmada, silisyum oranları %0,5 ile %3 arasında yer alan altı adet Zn-15Al-3Cu-Si alaşımı kokil döküm yöntemiyle üretildi. Silisyum oranının üretilen alaşımların yapısal, mekanik ve tribolojik özelliklerine etkileri araştırıldı. Alaşımların içyapıları tar…
Research Article
Open Access T5 ve T7 Isıl İşlemlerinin Zn-15Al-3Cu-1Si Alaşımının Yağlı Çalışma Koşullarındaki Sürtünme ve Aşınma Özelliklerine Etkilerinin İncelenmesi
Temel Savaşkan , Savaşkan T, Ali Paşa Hekimoğlu , Hekimoğlu A
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Bu çalışmada kokil kalıba döküm yöntemiyle üretilen Zn-15Al-3Cu-1Si alaşımına T5 ve T7 ısıl işlemleri uygulandı. Alaşımın dökülmüş ve ısıl işlem görmüş durumlardaki numunelerinin içyapıları taramalı elektron mikroskobu (SEM) ve enerji dispersif spektrometresi …
Research Article
Open Access Ultra Yüksek Moleküler Ağırlıklı (UYMA) Polietilen-1000 Plastik Malzemenin Abrasiv Aşınma Davranışının İncelenmesi
Mehmet Tabur, Tabur M, Mahmut İzciler, İzciler M
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Bu çalışmada, Ultra Yüksek Moleküler Ağırlıklı (UYMA) PE-1000 plastik malzemenin abrasiv aşınma performansı incelenmiştir. UYMA, yoğunluğu 0.930–0.935 g/cm3 arasında değişen ve molekül ağırlığı 2-6 milyon seviyesinde olan bir polietilen grubudur. Yüksek molekü…
Research Article
Open Access Investigation of Hybrid Composite Coating on ZA-27 Alloy Produced by MAO
Erdar KAPLAN , KAPLAN E, Ebru Emine ŞÜKÜROĞLU , ŞÜKÜROĞLU E, Olkan ÇUVALCI , ÇUVALCI O
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
In this paper, the steps in the production process of forming hybrid composite coatings on surface of the ZA-27 alloy known as a sliding bearing material, and analysis of surface morphology of the coated samples were investigated. The process includes forming …
Research Article
Open Access Kesme Hızı ve İlerlemenin Al-35Zn Alaşımının İşlenebilirliğine Etkisinin İncelenmesi
Ali Paşa Hekimoğlu, Hekimoğlu A, Şenol Bayraktar , Bayraktar Ş, Yakup Turgut, Turgut Y
2nd International Symposium on Innovative Approaches in Scientific Studies 2018
Bu çalışmada yüksek ticari saflıkta (%99,8) alüminyum ve çinko elementleri kullanılarak bir adet ikili Al-35Zn
alaşımı üretildi. Alaşım elementlerinin ergitilmesinde orta frekanslı bir indüksiyon ocağı kullanıldı. Ergimiş durumdaki sıvı metal oda
sıcaklığınd…
Research Article
Open Access Development of a Torque Vectoring Strategy to improve Performance in Electric Vehicles with Individually Driven Wheels
Hamza Shabbir, Shabbir H, Omer Cihan Kivanc, Kivanc O
Proceedings of the 6th International Symposium on Innovative Approaches in Smart Technologies 2022 https://doi.org/10.36287/setsci.5.2.017
In this work, a new torque vectoring strategy is developed and the results are compared with those of existing controllers that are widely used for such applications in the existing literature. The objective of said strategy is to generate the corrective yaw m…
Research Article
Open Access Pink Noise Generation from White Noise using Current Mode Analog Building Blocks
Atilla Uygur, Uygur A
Proceedings of the 6th International Symposium on Innovative Approaches in Smart Technologies 2022 https://doi.org/10.36287/setsci.5.2.014
Pink noise, which has a power spectral density that is inversely proportional to the frequency, is widely used for acoustic applications such as for testing audio equipment. Its generation from white noise requires such a system transfer function that it is no…
Research Article
Open Access Design of Droop Controller in Microgrid Architectures
Ayşe Bağıran, Bağıran A, Köksal Erentürk, Erentürk K
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.072
A microgrid is a power grid consists of distributed power generation units and loads. Microgrid is also a system that can operate in grid-connected mode and islanding (autonomous) mode. The control of distributed power generation units in microgrids is necessa…
Research Article
Open Access Operative-predictive control of a reactor plant based on fuzzy models
Malika Doshanova, Doshanova M, Ortiq Ruzibayev, Ruzibayev O, Sherzod Sabirov, Sabirov S, Oybek Begimov, Begimov O
Proceeding of the Cognitive Models and Artificial Intelligence Conference 2024 https://doi.org/10.36287/setsci.17.1.0034
This article discusses an algorithm for fuzzy control of the technological mode of a reactor unit using fuzzy production models of logical inference and fuzzified measurement information from the control object, discusses the methodology of a computational exp…
Research Article
Open Access Bir Manyetik Mikromanipülatör ve Kontrolü
Günyaz Ablay, Ablay G, Mustafa Böyük, Böyük M, Yakup Eroğlu, Eroğlu Y
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.012
Bir manyetik mikromanipülatör farklı uygulamalar için gerekli manyetik kuvveti üretme kabiliyetine sahip olarak geliştirilebilir ve mikron boyutlu parçacıkları manipüle edebilir. Bu çalışma etkin ve otomatik mikro-parçacık manipülasyonu için geribeslemeli kont…
Research Article
Open Access Yarı-Katı İşlem Yöntemi ile Üretilen Al-SiC Kompozit Malzemelerin Aşınma Davranışlarının İncelenmesi
İjlal Şimşek , Şimşek İ, Doğan Şimşek , Şimşek D, Dursun Özyürek , Özyürek D
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Bu çalışmada, yarı-katı işlem yöntemi ile Al-SiC kompozit malzemelerin sabit yük altında aşınma davranışları incelenmiştir. A356 matrise, 4 farklı miktarda (%5, %10, %15 ve %20) SiC ilave edilmiştir. Titreşimli tip değirmende bilyesiz olarak (30 dakika) karışt…
Research Article
Open Access The Effects of Boric Acid Additives on Aluminum Alloy Sliding Bearing Materials
Yusuf Yakut, Yakut Y, Selahattin Budak, Budak S, Mehmet Kaplan, Kaplan M
Ist International Symposium on Innovative Approaches in Scientific Studies 2018
Numerous studies have been carried out in the field of material science for the development of lightweight materials with high wear resistance, high strength and good corrosion resistance. Aluminum and its alloys are one of the most important engineering mater…
Research Article
Open Access Fiziksel Buhar Biriktirme(PVD) Tekniği ile Elde Edilen İnce Filmlerin Ortodontik Uygulamalardaki Etkisinin Araştırılması
Şengül Danışman, Danışman Ş, Gülfem Işık, Işık G, Feyza Holoğlu, Holoğlu F, Hikmetnur Danışman, Danışman H
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
Ortodontik tedavi sırasında diş hareketini etkileyen önemli faktörlerden biri sürtünme kuvvetidir. Sürtünme kuvvetine etki eden faktörlere müdahale edilebilirse ortodontik tedavinin süresi ve başarısı ile ilgili olumlu tahminler yapmak mümkün olacaktır. Sürtün…
Research Article
Open Access The Application of Battery Charging Circuit using PEM Fuel-Cell
Rasim Doğan, Doğan R, Ahmet Karaarslan, Karaarslan A
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
In this study, the experimental application of polymer electrolyte membrane fuel cell (PEM-FC) with dc-dc boost converter is realized for compact design of electric vehicle (eV). The PEM-FC is an electro-chemical device which combines hydrogen with oxygen to p…
Research Article
Open Access The Hybrid Control Method of Compound DC Motor using Fuel-Cell and Battery
Rasim Doğan, Doğan R, Ahmet Karaarslan, Karaarslan A
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
In this study, we focused on to drive a compound DC motor with a Fuel-Cell and battery, which uses hydrogen as a fuel. A fuel cell can supply maximum 40V electric. In order to drive a DC motor, it needs 200Vdc. Therefore, a microcontroller controlled boost con…
Research Article
Open Access Stronsiyum ve Stronsiyum-Magnezyum katkılarının Al-9Si Alaşımının Yapısal ve Mekanik Özelliklerine Etkisi
Ali Paşa Hekimoğlu, Hekimoğlu A, Merve Çalış, Çalış M, Gizem Ayata, Ayata G
Ist International Symposium on Innovative Approaches in Scientific Studies 2018
Bu çalışmada birer adet ikili Al-9Si, üçlü Al-9Si-0,1Sr ve dörtlü Al-9Si-0,1Sr-0,6Mg alaşımı indüksiyonlu ergitme ocağında ergitme ve oda sıcaklığında tutulan kokil kalıba döküm yöntemi ile üretildi. Alaşımların yapısal ve mekanik özellikleri üretilen alaşım k…
Research Article
Open Access Analysis Of Server Logs To Determine The Right Timing For Server Maintenance Using A Single Node And Multi-Node Hadoop Environment
Ferhat Oflezer, Oflezer F, Turgay Tugay Bilgin, Bilgin T
Ist International Symposium on Innovative Approaches in Scientific Studies 2018
The log files that are continuously recorded are one of the most important information generated by web
servers.Hadoop is an open source application platform that works on large amounts of data using hardware clusters. Web server
logs are large-volume plain …