Open Access

Evaluation of building energy performance with paper waste reinforced clay brick

Abid Ustaoğlu1*, Kübra Kurtoğlu2, Osman Gençel3, Ertuğrul Erdoğmuş4, M. Sabri Gök5
1Bartin University, Bartın, Turkey
2Bartin University, Bartın, Turkey
3Bartin University, Bartın, Turkey
4Bartin University, Bartın, Turkey
5Bartin University, Bartın, Turkey
* Corresponding author: abidusta@hotmail.com

Presented at the International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT2017), Tokat, Turkey, Dec 02, 2017

SETSCI Conference Proceedings, 2017, 1, Page (s): 285-288

Published Date: 08 December 2017

In this paper, a thermal insulation analysis was carried out for a building using paper waste reinforced clay brick as building material. Firstly, the analysis was made using two different normal wall bricks as building material for the sample building. Later, the analysis was carried out for the reference paper waste reinforced clay brick, and the results of these two cases were compared. Within the scope of analysis, depending on the building material used, the brick thickness was changed at certain ratios for both cases, and changes due to thickness, specific heat loss and total heat need were observed with Engineering Equation Solver (EES) program. As a result of these observations and analyzes, it was concluded that the use of paper waste reinforced clay brick instead of using two different standard wall bricks as building materials significantly reduced the total energy requirement. Moreover, the result of this study shows us that, since the use of bricks made of waste and brick instead of normal wall bricks as building material is produced from natural sources as well as contributing to recycling and associated energy saving; it is inevitable to contribute to a healthier insulation since it has both a low production cost and a lower heat transfer coefficient.  

Keywords - thermal insulation, clay brick, paper waste, thermal performance, energy performance

[1] M. Sutcu, J. J. d. C. Diaz, F. P. A. Rabanal, O. Gencel, S. Akkurt, Thermal performance optimization of hollow clay bricks made up of paper waste, Energy and Buildings 75 (2014) 96–108.

[2] G. K. Oral, G.Manıoglu, Energy efficiency and thermal insulation in building facades [Online], Avaliable: http://www.yalitim.net/?pid=23629, 2017.

[3] D. D. P. Moreno, C. Saron, Low – density polyethylene waste/recycled wood composites, Composite Structures Vol. 176, Sept. 15, 2017, Pages 1152 – 1157.

[4] A.K. Mandal, H. R.Verma, O. P. Sinha, Utilization of aluminum plant’s waste for production of insulation bricks, Journal of Cleaner Production 162 (2017) 949 – 957.

[5] A. N. Adazabra, G. Viruthagiri, P. Kannan, Influence of spent shea waste addition on the technological properties of fired clay bricks, Journal of Building Engineering Vol. 11, May, 2017, Pages 166- 177.

[6] TS 825, Heat insulation rules in buildings, Turkish Standard, 2008, Ankara, Turkey.

[7] I. Uzun, In the light of regulations heat insulation and applications, Epsder Publishing, 2011, Kırıkkale, Turkey

0
Citations (Crossref)
17.3K
Total Views
378
Total Downloads

Licence Creative Commons This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
SETSCI 2026
info@set-science.com
Copyright © 2026 SETECH
Tokat Technology Development Zone Gaziosmanpaşa University Taşlıçiftlik Campus, 60240 TOKAT-TÜRKİYE